How do I access my modem settings?

Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D-Link modem in the address bar: This should open the login page for your modem's configuration pages.

Beside this, how do I open my modem settings?

Open a web browser. Type or in the address bar, then press Enter on your keyboard. When prompted, enter the Connection Hub username (the default is admin). Enter the Connection Hub password (the default is admin).

Similarly, how do I find my modem IP? Click the Windows Start button, type "cmd" in the Search box and press "Enter" to open the Command Prompt. Type "ipconfig /all" in the Command Prompt and press "Enter" to run the command. Locate the "Default Gateway" line. The IP listed on the Default Gateway line is the IP address of your modem.

Furthermore, how do I find my modem?

Here's how to find the modem in Windows.

Choose Control Panel from the Start menu, and then choose Phone and Modem Options. You see one of two dialog boxes.
Fill in your initial location information.
Click the Modems tab.
Select your laptop's modem from the list.
Click the Properties button.

Why can I not login to my router?

There are many reasons why you may not be able to access the NETGEAR router login (admin settings) page. The most common reasons are browser cache and IP address issues. Note: If you are having issues with router setup or your wireless router network see the following links instead: Wireless Networking Setup And Issues.

How do I login into my router?

To log in to your router and access its settings:

Launch a web browser from a computer or mobile device that is connected to your router's network.
Press Enter or click Search.
In the router login window, enter your user name and password.
Click or tap OK or Log In.

How do I configure my router?

Step 1: Place your wireless router.
Step 2: Configure your wireless router gateway.
Step 3: Connect your gateway to your new router.
Step 4: Change your wireless router's admin password.
Step 5: Update the router's firmware.
Step 6: Establish a password for your Wi-Fi network.
Step 7: Enjoy your Wi-Fi network!

How can I find my modem password?

Check your router's default password, usually printed on a sticker on the router. In Windows, head to Network and Sharing Center, click on your Wi-Fi network, and head to Wireless Properties > Security to see your Network Security Key. On a Mac, open Keychain Access and search for your Wi-Fi network name.

How do I access my router from my phone?

Changing the Linksys Wi-Fi Router's wireless settings using your Android™ smartphone

On your Android™ smartphone, open a browser.
Enter the IP address of your router in the Address bar and tap Go.
Enter your login credentials and tap Sign in.

How do you tell if your modem is also a router?

How can I tell if my modem has a built-in wireless router?

Ethernet ports – If your modem includes Ethernet ports on the back, it also doubles as a router, though this does not guarantee it supports Wi-Fi.
Wi-Fi logo – Look for the Wi-Fi logo somewhere on the router.
Wi-Fi light – Most wireless devices include an LED that indicates Wi-Fi is turned on and functioning.

How do I know if my modem is router?

In order for devices on the network to connect to the Internet, the router must be connected to a modem. Therefore, most routers have a specific Ethernet port that is designed to connect to the Ethernet port of a cable or DSL modem. A modem is a device that provides access to the Internet (see below).

How do I connect to my modem?

Connect an Ethernet cable to the "Ethernet" port on your modem. This port is used to connect other devices to your modem. Connect the other end of the cable to the router. Use the other end of the Ethernet cable to connect to the port labeled "WAN", "Internet", or something similar.

How can I reset my modem?

To reboot your modem and your WiFi router:

Unplug the power cord from the back of the modem and remove any batteries.
Unplug the power cord from the WiFi router.
Wait 60 seconds, and then reinsert any batteries and reconnect power to the modem.
Allow at least two minutes to ensure that the reset is complete.

How do I reset my modem IP address?

For Windows users

Get to a command prompt. (START, run, cmd).
Type "ipconfig /release" (without the quotes, on the command line by itself).
Shut down computer.
Turn off computer.
Turn off all ethernet hubs/switches.
Turn off cable/DSL modem.
Leave off overnight.
Turn everything back on.

Does your modem have an IP address?

A local IP address may let you communicate with a modem through a router. But, like a router, a broadband modem is a computer with a web based user interface. And, like any device with a web interface, the modem has an IP address.

How do I change the IP address of my modem?

How to Change Your Router's IP Address

Log into your account. Open your browser and enter the manufacturer's default IP address, typically located on the underside of your router or in the user manual.
Open the basic setup tab.
Change one (or both) of the last two numbers in the IP address.
Click Apply, and wait for your router to reboot.

What is IP password?

What is the IP address to log into my router? What is my routers username and password?

Most Linksys routers use:
IP Address:	192.168.1.1
Username:	admin
Password:	admin
Most Netgear routers use:

How do I connect to my modem IP?

To change the IP address of this router:

Open your Web Browser (such as Internet Explorer), and enter the following numbers into the Address Bar: 192.168.1.1.
Click on the General Setup on the left-menu.
Click on the LAN on the left-menu. You will see the following:
Now Click on Apply button to save the settings.

How do I access my 192.168 1.1 router?

Open or type 192.168.l.l into your browser's URL bar.

Once the page open, you will be directed to the user login page. There you will have to enter the router username and password. (
Once you enter the router's login credentials, you will be logged in to the router's admin control panel.